LUXOR SG with BIN SG

The LUXOR SG dry air generator with BIN SG drying bin forms a complete unit with a single power supply and is supplied ready for connection.

The ecoPROTECT function avoids thermal damage and overdrying of the plastic granulate by lowering the drying temperature during drops in material throughput rates. In addition, this function saves between 6 and 10.5 % energy during the drying process, depending on the size of the dryer.

The LUXOR SG control stands out due to its modern, Ethernet-based open network architecture enabling standard networking with all other motan CONTROLnet controls.

The diagnostic function of the control provides assistance in troubleshooting in case of service. All inputs and outputs in the control can be selected and checked.

The housing has been revised and offers optimum accessibility for maintenance work.

Rapid dehumidification of the desiccant cartridge during the regeneration phase, as the regeneration air flows in the counter direction.

The LUXOR SG dry air generator is operated without compressed air supply, thus saving energy and costs.

Control is via a full colour touch display and is integrated in the dry air generator. It enables user-friendly operation of the dry air generator and the drying hopper.

The three-phase monitoring function prevents the process/regeneration blower from running in the wrong direction, so protecting the raw material.

The integrated material database allows the selection of preset drying parameters that enable an ideal drying process of the plastic granulate to be processed.

The weekly timer supports an optimized and automated operation of the dryer.

The optimized suction box ensures ideal transfer of the dried plastic granules from the drying bin to the processing machine

The drying bin is fully insulated on both the cylindrical and conical sections. The heat losses of the drying bin are thus reduced to a minimum.

For use in regions with high humidity, the dry air generator can optionally be run with dry compressed air rather than ambient air during the regeneration phase, so ensuring a low and stable dew point.  

For greater efficiency when drying at higher temperatures, the dry air generator can be additionally equipped with an air/water cooler for the return air.

If required, dew point indication can be additionally integrated into the control.